Lacrosse Settings

While in a Lacrosse game, press the GAME SETUP key to modify the following game settings:

Defaults

  1. Period Time = 15:00

  2. Show Timer Tenths = NO

  3. Shot Time 1 = 80

  4. Shot Time 2 = 60

  5. Number of Periods = 4

  6. Number of Timeout = 2

  7. Timeout Time = 2:00

  8. Intermission Time = 10:00

Adjust game settings from the Game Setup menu as described in Change Game Settings.

Game Time

Game Time setting defines the length of a Lacrosse period. The default value is set to 20 minutes. To change the default period time, choose 1. Game Time and press SELECT YES / NO key to edit the value. Key in the minutes and seconds of the new default period length and press ENTER to accept. Press CANCEL to exit edit mode without changes.

Show Timer Tenths

When setting Show Timer Tenths is set to YES, in the last minute of each period, the scoreboard timer will change to show seconds.tenths (SS.T). The console display will also then change to show minutes:seconds.tenths (MM:SS.T) indicating that last minute tenths mode is enabled. When set to NO the timer will display minutes:seconds (MM:SS).

Shot Time 1 & 2

Set the shot clock time to this value when the respective shot clock reset key is pressed. When shot clock reset key is released, the shot timer will begin to run. If not using the shot clock, set this to zero to disable the shot clock display.

Intermission Time

The intermission time setting is used when the Intermission key is pressed. The intermission time is displayed on the timer and timeouts are reset. Penalty timers are stopped during intermission. When the RESET TIME key is pressed, scoreboard timer will display the next period time, and penalty timers will resume running on the next clock start.

Penalty Timers

Penalty time values are set for non-releasable and releasable penalties upon entering a new penalty by pressing the PENALTY key for the respective team.